Porsche 914 2.0 Console Shifter Plate Recover Vinyl

Recover your damaged console board easily. Simple peel and stick quality vinyl is similar in color and texture of the original. It is already cut to the length of the board edges(no wrap), so all you will have to do is wrap it around the sides of the board. Then make the cutouts for the shift boot and heater handle! Some contact adhesive added to the back of the board could help the adhesive hold better/longer. The original covering was not a 'wrap' it was 2 heat sealed sheets of vinyl. This piece is cut to the length of the board, so it sticks down flat on the ends making a similar edge. The sides do wrap to the backside. Gives a renewed surface quickly with nothing else to do or buy. You can put it right over the original covering or bare wood. If you ever tried to 'upholster' one of these things...well you know.

NOTE: It is already cut to the right size front to rear so all you will have to do is wrap it around the sides. Front and rear the vinyl is cut to line up with the board edges keeping the material flat with no bulges and a nice edge.